Rotary actuators
Guide to Controls (BG 83/2023) written by John Marrow and published by BSRIA in June 2023, suggests that: ‘Rotary actuators can be connected to the shaft of a damper or rotary shoe valve directly or by using a special linkage kit. There are also linkage kits to allow rotary actuators to connect to lift and lay valves. Rotary actuators are powered by a switched or pulsed 24 V AC or 230 V AC supply. They are also available as a modulating actuator with a 0-10 V DC or 4-20 mA positioning signal and a 24 V AC power supply.’
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Your guide to The Construction Reset at UKCW Birmingham.
Accommodating the Victorian and Edwardian working woman. Book review.
Rethinking passive fire protection in design
PFP demands the same level of design rigour as structure or services.
38% of Gen Zs feel safe when a fire door is wedged open.
Stunning images from around the world
Shortlist for CIOB’s Art of Building photography competition.
Guidance for conversion of traditional pre-1919 stone buildings.
Industrial heritage in the Ruhr
A marked difference to the fate of industrial landscapes in the UK.
Communities will be able to build their own clean energy.
Why diversity and inclusion matters for SMEs
CIOB’s D&I Charter shows how practical changes can support long-term growth.
Cut electricity bills to power growth
Coalition sends joint letter to the Chancellor.
Gasholders: a history in pictures. Book review.
Recognition, influence and growth
SocEnv identifies three strategic pillars in new strategy to 2045.